JONSERED 90
MANUFACTURED BY: JONSEREDS FABRIKERS AB PARTILLE, SWEDEN SERIES OR ASSEMBLY NUMBER: YEAR INTRODUCED: 1975 YEAR DISCONTINUED: 1980 ENGINE DISPLACEMENT: 87cc (5.3 cu. in.) NUMBER OF CYLINDERS: 1 CYLINDER BORE: 54mm PISTON STROKE: 38mm PISTON RING THICKNESS: CYLINDER TYPE: Aluminum with Nikasil coated bore INTAKE METHOD: Piston ported MANUFACTURER ADVERTISED H.P.: 3.8kW @ 8500 rpm WEIGHT: 7.49kg powerhead only OPERATOR CONFIGURATION: One Man operation HANDLEBAR SYSTEM: Anti-vibration CHAIN BRAKE: none CLUTCH: Centrifugal DRIVE TYPE: Direct CONSTRUCTION: Die cast magnesium MAGNETO TYPE: Pagani CARBURETOR: Tillotson HS series MAJOR REPAIR KIT: RK-23HS MINOR REPAIR KIT: DG-5HS/T AIR FILTER SYSTEM: Nylon mesh cartridge STARTER TYPE: Jonsereds automatic rewind OIL PUMP: Automatic, worm gear driven MAXIMUM ENGINE RPM: 10,700 IDLE RPM: IGNITION TIMING: 2.9mm before TDC BREAKER POINT SETTING: 0.3 to 0.4mm FLYWHEEL/COIL AIR GAP: 0.3 mm (0.012 in.) SPARK PLUG TYPE: Champion CJ7Y, Bosch WS7F SPARK PLUG GAP: 0.5 to 0.6mm (0.020 to 0.024 in.) CRANKSHAFT MAIN BEARINGS: Ball FUEL TANK CAPACITY: 1.1 litres FUEL OIL RATIO: 25:1 RECOMMENDED FUEL OCTANE: Regular MIX OIL SPECIFICATION: Electrolux approved Two-cycle chain saw mix oil CHAIN PITCH: 3/8 in. CHAIN TYPE: Chisel BAR MOUNT PATTERN: 18 link SHORTEST GUIDE BAR SUPPLIED: 38cm (15 in.) LONGEST GUIDE BAR SUPPLIED: 58cm (23 in.) COLOUR SCHEME: Red and Black enamel
JONSERED RAKET 75 XM
MANUFACTURED BY:JONSEREDS FABRIKERS ABPARTILLE, SWEDEN SERIES OR ASSEMBLY NUMBER:XM 75 YEAR INTRODUCED:1967 YEAR DISCONTINUED:1968 ENGINE DISPLACEMENT:75cc NUMBER OF CYLINDERS:1 CYLINDER BORE:50mm PISTON STROKE:38mm CYLINDER TYPE:Aluminum with chrome plated bore INTAKE METHOD:Piston ported MANUFACTURER ADVERTISED H.P.:2.9kW @ 7000 rpm WEIGHT :6.54kg OPERATOR CONFIGURATION:One Man operation HANDLEBAR SYSTEM:Rigid CHAIN BRAKE:none CLUTCH:Centrifugal DRIVE TYPE:Direct CONSTRUCTION:Die cast magnesium MAGNETO TYPE:Pagani CARBURETOR:Tillotson HS-21D series MAJOR REPAIR KIT:RK-23HS MINOR REPAIR KIT:DG-5HS/T AIR FILTER SYSTEM:Nylon mesh screen cylinder STARTER TYPE:Jonsered automatic rewind OIL PUMP:Automatic, worm gear driven OPERATING RPM:9,400 IGNITION TIMING:2.5mm before TDC BREAKER POINT SETTING:0.30 to 0.40mm FLYWHEEL/COIL AIR GAP:0.3 mm (0.012 in.) SPARK PLUG TYPE:Champion CJ7Y SPARK PLUG GAP:0.5mm to 0.6mm (0.020 to 0.024 in.) CRANKSHAFT MAIN BEARINGS:Ball FUEL TANK CAPACITY:1.1litres FUEL OIL RATIO:25:1 RECOMMENDED FUEL OCTANE:Regular MIX OIL SPECIFICATION:Two-cycle chain saw mix oil CHAIN PITCH:3/8 in. or .404 in. CHAIN TYPE:Chipper BAR MOUNT PATTERN:18 link SHORTEST GUIDE BAR SUPPLIED:38 cm (15 in.) LONGEST GUIDE BAR SUPPLIED:60 cm (24 in.) COLOUR SCHEME:Red and Silver Enamel
JONSERED RAKET P (PROTOTYPE)
LIMITED INFORMATION ABOUT THIS SAW. AFTER THE END OF PRODUCTION OF THE COMO DIESEL (SERIAL 4000), JONSERED BUILT THEIR OWN DIESEL SAW MODEL P(SERIAL4360) ANCESTER OF THE XA MODEL,THE FIRST OFFICIAL JONSERED SAW...ONLY 360 SAW WERE MADE FOR THE TEST RUN.
JONSERED XH RAKET 85
MANUFACTURED BY:JONSEREDS FABRIKERS AB, PARTILLE, SWEDEN
SERIES OR ASSEMBLY NUMBER:85
YEAR INTRODUCED:1963
YEAR DISCONTINUED:1968
ENGINE DISPLACEMENT:85cc (5.18 cu. in.)
NUMBER OF CYLINDERS:1
CYLINDER BORE:52mm (2.04 in.)
PISTON STROKE:40mm (1.57 in.)
CYLINDER TYPE:Aluminum with chrome plated bore
INTAKE METHOD:Reed valves with third port
MANUFACTURER ADVERTISED H.P.:2.7kw @ 6050 rpm
WEIGHT :7.75kg (17.08 lbs.)
OPERATOR CONFIGURATION:One Man operation
CLUTCH:Centrifugal
DRIVE TYPE:Direct
CONSTRUCTION:Die cast magnesium
MAGNETO TYPE:Pagani
CARBURETOR:Tillotson HL series
AIR FILTER SYSTEM:Fabric mesh
STARTER TYPE:Jonsereds automatic rewind
OIL PUMP:Manual
OPERATING RPM:8,100
IGNITION TIMING:2.8mm to 3.6mm before TDC
BREAKER POINT SETTING:0.35mm to 0.4mm (.014 in. to 0.016 in.)
SPARK PLUG GAP:0.5mm to 0.6mm (0.020 in. to 0.024 in.)
CRANKSHAFT MAIN BEARINGS:Ball
FUEL TANK CAPACITY:1.20 litres (40.5 oz.)
RECOMMENDED FUEL OCTANE:Regular
CHAIN PITCH:.404 in. (10.2mm)
COLOUR SCHEME:Blue and Silver enamel
